LT-40: CG and Control Throws???
 

A friend of mine bought a used SIG LT-40 from someone and wants me to teach him to fly. That is no big deal, but I want to find out what the control throws should be and where the CG should end up? I want to make sure everything is as it should be.

RE: LT-40: CG and Control Throws???
 

Tooter, the cg can be 1/2 inch in front of or behind the main spar on the wing. as for the control throws, servos on thier outer holes and the flight controls no more than the second hole from the out side end will work just fine.

HTH
Tom

RE: LT-40: CG and Control Throws???
 

from book... for Sig LT-40 70 inch wing

CG: 3.5 -> 4.25 inch from leading edge of wing

Elevator: 9/16th inch up and down
Rudder: 1 inch left and right
Ailerons: 3/8th inch up and down

RE: LT-40: CG and Control Throws???
 

Thanks!!!