Need advise for coating
 

I have gotten a 4*40 that I'm going to be building. (haven't started yet) The building part should be fairly simple but putting on the Monocote or Ultracote or whatever seems to be an unknown. :( I have tried to put some on my Avistar for different repairs and it always seems to look wrinkled and sloppy. I was wondering if there are any good web sites out there with some tips on how to work with the stuff. TIA

RE: Need advise for coating
 

Rob, Here is a link to a basic "How To" on covering:

http://www.rcuniverse.com/magazine/a...?article_id=67


Also, the link below will take you to one of the RCU reviews (GP Profile-38)

Scroll down the review to the section on covering and there are 3 videos that may help

http://www.rcuniverse.com/magazine/a...article_id=352

RE: Need advise for coating
 

Rob I would use Ultracote for my first cover job. It is a little easier to work with. And read the instructions you get with the covering. There is a lot of good info there on how to apply it. Good luck with it.

Mark Shuman