help,help,help.
 

hi every 1

as u all no i bougt a sanwa v6000 controller off ebay and i have receved it today and i put the cristaly from my faturba 6exa in to it and in to my recever(fatarba) and the servoes keep on judering and wen i do elevatir somtimes the alerons are working with it and he rudder with the throttle?and i have noticed that the elervator and alerons on on different channals to my fatarba 6exa and i wont to use my sanwa as a slave and give it to my dad wen im finished. whats a matter with my v6000?does it need tuning ore somthink?and is it compaterble with my 6exa?



please help.

RE: help,help,help.
 

luke21.... I'm not great at this but.... Airtronics is positive shift and Fatuba
in negative shift... No match..... Plus you should use each radio.s own cystal.
I know on my RD 8000 I can change from pos. to neg. shift... But I'm not
sure if the 6000 can do that.... Hope this helps

RE: help,help,help.
 

i just changed it to the original christald and it works.:Dyipeee

but as i was saying i wont to use it for buddying and on the first 2 channels there both different would this be ok to buddy with after all u r tuning it offf 1 handset.

RE: help,help,help.
 

Luke,
I think we've already covered this in another forum, and if not I do apologize. You CAN NOT use the Airtronics radio as a buddy box for a Futaba. There is no way to make it work. If you want to buddy box off of the Futaba then you will need to get a Futaba buddy box. I know that you want to make it work with what you bought, but it's just not going to happen. The same think applies to trying to use the crystal from the Futaba in your Airtronics.

Sorry for the bad news.

Ken

RE: help,help,help.
 

but it workes wen i put the sanwa cristal in to my futarba.