RCU Forums - servo install in wing

RCU Forums (https://www.rcuniverse.com/forum/)

- Beginners (https://www.rcuniverse.com/forum/beginners-85/)

- - servo install in wing (https://www.rcuniverse.com/forum/beginners-85/37987-servo-install-wing.html)

newbieguy

01-20-2002 03:02 AM

servo install in wing

i am trying to install a servo in my Tower Trainer wing. the servo will fit except for the wire that comes out of it. how do i install the servo so the wire has enough clearence?

upnflyin

01-20-2002 03:38 AM

servo install in wing

If I am reading your post right your problem is fitting the servo into the hole originally disigned for the servo and not a modification right?
All you need to do is enlarge the hole slightly as needed to make it fit. They are designed to fit the average servo and yours might be slightly different. No problem.

mselby

01-21-2002 12:02 AM

servo install in wing

file a small groove in the side of the mount to allow the wire to clear through. Do not make the groove any wider than necessary to avoid problems with the mount holes.
Mike

All times are GMT -8. The time now is 03:14 AM.