RCU Forums - ANOTHER BTE VENTURE BUILD

Page 2 of 2

Show 40 post(s) from this thread on one page

RCU Forums (https://www.rcuniverse.com/forum/)

- Beginners (https://www.rcuniverse.com/forum/beginners-85/)

- - ANOTHER BTE VENTURE BUILD (https://www.rcuniverse.com/forum/beginners-85/4233633-another-bte-venture-build.html)

Buteos

10-31-2006 04:58 PM

RE: ANOTHER BTE VENTURE BUILD

I sandwiched the ribs between two pieces of pine and drilled all of them together, I did this before I removed the pins that hold them all together. If you have altready taken them apart you can sharpen a short piece of copper tubbing and us that to hand drill the holes. Hope this helps!!

RhyanO

11-01-2006 07:46 AM

RE: ANOTHER BTE VENTURE BUILD

That does help.
Thank you for the tip.

Ryan

Buteos

11-01-2006 09:13 PM

RE: ANOTHER BTE VENTURE BUILD

Many people on here have built this plane and if you type "Venture 60" into the search it will bring up several threads and tons of ideas. Good luck!

All times are GMT -8. The time now is 02:12 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page