9303
 

can my 9303 jr tx scan rx to same channel as tx is on?ill break it down lets say the rx is channel 48 and my tx is 55.can i scan it to work together?

RE: 9303
 

not with the stock module in the TX. Either replace the module in the TX with this one.

http://www.horizonhobby.com/Products...ProdID=JRPTXMS

Or replace the crystal in the RX with the matching channel in the TX

You could also buy the SYnth receiver

http://www.horizonhobby.com/Products...ProdID=JRPR790

or this one

http://www.horizonhobby.com/Products...rodID=JRPR2000

It is against FCC regulations to change the crystal in the TX

RE: 9303
 

thanks bubba.i think ill just go with the scan select rx.cause ill need to buy a receiver anyway with every new plane.but can i buy a regular rx and just tell them my channel on tx and they will send me rx with same channel as my 9303?

RE: 9303
 

If you have to buy a new reciver just get it on the same chanel as the TX and your problem is not a problem any more.

Cheers.

RE: 9303
 

thanks guys i have figured out the electronics now.now i just need to work on my landings:)