Wouldn't it be cool to have a knowledge base?
 

Guys:

I've been doing this on and of (mostly off lately) for about 15 years. Before I even built a plane I read RCM, MAN, and Tower Talk for a year. I read about tuning engines, proper glue usage, covering tips, radio installations, building techniques and all kinds of stuff.

Is there a knowledge base here with all the pertinent poop by category? Things like "install the fuel tank so its centerline is even or just slightly below the carb spraybar", the absolute best tricks for gluing hinges, making slop-free control connections, supporting your flexible pushrods, etc.?

N

RE: Wouldn't it be cool to have a knowledge base?
 

There are a couple of places around the net with information on them, but no complete "knowledge base" like you ask for.

There isn't one now, but Minnflyer and I can safely say that there will be soon........ ;)

Ken

RE: Wouldn't it be cool to have a knowledge base?
 

G'day Mate,
Have a look at this links site, it is the best I've found, at least until Ken & Minflyer get there's ready.
http://homepages.ihug.co.nz/~atong/