aerobird 3 problem
 

I purchased a aerobird for my son and made out very well the first couple of flights. Once it hit hard to the gound the battery came out from the storage and pulled the circuit board out. With that the servo ribbin cable came off. I was able to compare it with another bird in the store to see which pins they went into. The same thing happened on the next flight. The hard part is taking it all apart to plug them back in. I just wanted to know if anyone else has had this problem.

RE: aerobird 3 problem
 

The good news is a fix should be fairly simple. Try putting a drop of hot glue on the connection, this should hold everything in place the next time your Aerobird lands with a bump.