SPINNER PROBLEMS
 

Can anyone tell me what spinners they're using on their Saito 1.00 4 stroke (using on a Harrier 1.00)? I bought a True Turn 2 1/4 and had to cut open the slots for the blade to fit. Still could not get it to fit properly. So, I got a plastic 2 1/2 spinner and had to cut open the slots on it for the prop to fit. Don't they make a 2 1/4 with large slots? I came back from the hobby store with a 2 1/2 True Turn, the prop don't fit that one either. I don't want to ruin another spinner by cutting the crap out of it. Any suggestions?

RE: SPINNER PROBLEMS
 

Tru Turn will cut your spinner for wide blade props.

RE: SPINNER PROBLEMS
 

You'll find that very few spinners will fit your application without trimming them some. The best way to get a spinner to fit is order one directly from [link=http://www.tru-turn.com]Tru-Turn[/link] . When you order from them you can tell them what prop that you are going to use and they will cut the spinner so that the prop will fit properly. Otherwise it's next to impossible to find a spinner that will fit off the shelf.

Ken