RCU Forums - need suggestions for servos

RCU Forums (https://www.rcuniverse.com/forum/)

- Beginners (https://www.rcuniverse.com/forum/beginners-85/)

- - need suggestions for servos (https://www.rcuniverse.com/forum/beginners-85/8092231-need-suggestions-servos.html)

goirish

10-28-2008 08:52 AM

need suggestions for servos

I am building a Big Bingo powered by magnum 180 4s. Wondering if the servos that I am looking at are appropriate. HiTec HB625mg
Speed:

0.18 sec/60 degrees at 4.8V

0.15 sec/60 degrees at 6.0V

Torque:

76 ounce-inches (5.5 kg-cm) at 4.8V

94 ounce-inches (6.8 kg-cm) at 6.0V

Plan on using these for the wing, rudder and elevator. Going to use HG322 HiTec servo for the throttle. Will be using a 6.0V system. Any comments.

keep it nice CGR.

bigedmustafa

10-28-2008 10:25 AM

RE: need suggestions for servos

Sounds like a good matchup to me.

goirish

10-28-2008 10:40 AM

RE: need suggestions for servos

Quote:

ORIGINAL: bigedmustafa

Sounds like a good matchup to me.

Thanks bigedmustafa. BTW how are the cornhusker's doing. I am a ND fan and at least we beat Michigan. We are 6-2, better than last year.

All times are GMT -8. The time now is 11:46 AM.