RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Beginners (https://www.rcuniverse.com/forum/beginners-85/)
-   -   Chicken Stick (https://www.rcuniverse.com/forum/beginners-85/8574761-chicken-stick.html)

Steve Steinbring 03-13-2009 04:35 PM

Chicken Stick
 
Need a backup or prefer a chicken stick vs. a starter how about this idea?

I can't take full credit for this idea as I used a similar chicken stick recently at our field. Only the way I made a couple sticks for myself.

Purchase a 9" long 1/2" carriage bolt and cover it with 1/2" ID clear reinforced tubing. The tubing just slips on in place with a little pressure. The result is a chicken stick with good mass to flip the engine through with authority when starting.


richg99 03-13-2009 04:45 PM

RE: Chicken Stick
 
I use a cut-off golf shaft and grip. Nice feel and they have great cushioning. The full clubs cost a buck at the local Salvation Army store. Steel shaft or graphite...my score is the same. Ha Ha Rich

goirish 03-13-2009 04:48 PM

RE: Chicken Stick
 
Isn't it kind of hard to play with the rest of the club?

RCKen 03-13-2009 04:50 PM

RE: Chicken Stick
 
I cut off a length from a broom handle and wrapped it in electrical tape. I used that for probably 8-9 years. The only reason I stopped using it is a friend got a new lathe and he made us all chicken sticks as a project to practice on.

Ken

Jetdesign 03-13-2009 04:56 PM

RE: Chicken Stick
 


ORIGINAL: Steve Steinbring

Need a backup or prefer a chicken stick vs. a starter how about this idea?

I can't take full credit for this idea as I used a similar chicken stick recently at our field. Only the way I made a couple sticks for myself.

Purchase a 9" long 1/2" carriage bolt and cover it with 1/2" ID clear reinforced tubing. The tubing just slips on in place with a little pressure. The result is a chicken stick with good mass to flip the engine through with authority when starting.


I bet with the weight it feels really nice.

mclina 03-13-2009 06:07 PM

RE: Chicken Stick
 
Mine is just a chunk of 1/2" dowel with electrical tape wrapped around the grip.

cowboydfk 03-13-2009 06:11 PM

RE: Chicken Stick
 
I made one from a dowle with a automotive hose pushed over it.

MetallicaJunkie 03-13-2009 06:54 PM

RE: Chicken Stick
 
mine is made out of a small bicycle hand bar grip, a wooden dowl, electrical tape and a rubber hose

Tom Nied 03-13-2009 08:22 PM

RE: Chicken Stick
 
I use one of these. http://www3.towerhobbies.com/cgi-bin...?&I=LXFU02&P=7 Not bad until it breaks but it's and easy fix with an appropriate dowel rod.

Gray Beard 03-13-2009 11:05 PM

RE: Chicken Stick
 
I think I have a piece of one inch dowel in my flight box?? I have used it a time or two but not often. I also have a big leather glove in my box for gassers but don't use it often either.

fly boy2 03-13-2009 11:29 PM

RE: Chicken Stick
 
When I lost my chicken stick; I pulled a small branch from a tree. I used it for a good deal, until I got a new stick


All times are GMT -8. The time now is 10:27 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.