What engine for U Can Do 3D?
 

I'm trying to determine the best engine for my next plane, a Great Plains U Can Do 3D. Recommended to me by the guys at
the club. However, the range of engines for the UCanDo is stated to be from .64-.91 2 stroke or .75-.91 4-stroke. On top of
that, the guys at the club say "there's no such thing as too much power, plus a 4-stoke give a faster response--get a Saito 100" despite the UCanDo warnings about overpowering the airframe.
Comments would be helpful.

What engine for U Can Do 3D?
 

Saito 1.00 is perfect, O.S. .91 is a close second. YS .91 is a little too heavy....

Most .91 2 strokes are also decent, but this plane really deserves a 4 stroke in my opinion.

Try this-

http://www.rcuniverse.com/showthread...20&forumid=230

There is more information on this airplane around here than anybody thought was possible!

Welcome to RCU... :))

What engine for U Can Do 3D?
 

Saito 100. the statistics is overwhelming

What engine for U Can Do 3D?
 

The Saito 100 would be a good match but as for the YS there is a Ucan do with one at my club and it flies great, Just have to have throttle control with the bigger 4 strokes,

Dauntae

What engine for U Can Do 3D?
 

Well, you need throttle control no matter what engine you use...It's only overpowered if you use all the power there!

The YS .91 is a great engine, but it is heavy. It's 6 or 8 ounces heavier than the Saito 1.00 which is a significant difference. You don't need the extra power and definitely don't need the extra weight.

Thank you all
 

Thank you all for your advice. It sounds like the saito 100.
superfunguy

Re: Thank you all
 

Now that you've decided to join the Saito club, take your time to enjoy this site http://saito-engines.info/