Park 480 replacement
05-12-2011, 05:22 PM
#1
Member
Thread Starter
Join Date: Jan 2006
Location: Lexington, KY
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Park 480 replacement
I have an e-flite PT-19. I am looking at brushless outrunner motors on Hobby King, but am not sure how to translate a Park 480 Outrunner to the stats on Hobby King. Can you help me with these conversions, and how to select the right size motor on Hobby King for my PT-19?
05-13-2011, 06:13 AM
#2
Senior Member
Join Date: Dec 2002
Location: Chattanooga,
TN
Posts: 2,198
Likes: 0
Received 0 Likes
on
0 Posts
RE: Park 480 replacement
http://www.hobbyking.com/hobbyking/s...dProduct=16230
An E-flite 480 is 87g/250W... so this is about the same.
I recently tested the 1400Kv version: http://www.rcgroups.com/forums/showt...&highlight=ntm
An E-flite 480 is 87g/250W... so this is about the same.
I recently tested the 1400Kv version: http://www.rcgroups.com/forums/showt...&highlight=ntm
05-13-2011, 05:11 PM
#3
Member
Thread Starter
Join Date: Jan 2006
Location: Lexington, KY
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
RE: Park 480 replacement
Dr Kiwi....is there a process...or method i can see use to understand how to make there comparisons? I am very new to electrics and am trying to understand the processes.....
Thanks,
chris
Thanks,
chris
