Brushless motor help
03-28-2019, 04:16 PM
#1
Thread Starter
Join Date: Apr 2003
Location: New Freedom, PA
Posts: 10,456
Likes: 0
Received 0 Likes
on
0 Posts
Brushless motor help
I bought these from Amazon.
LHI DX2205 2300KV
Not mounted they spin up fine. Soon as they are mounted it is as if the screws are stuck in the motor preventing it turn well. The screws are not in the motor. I even used shortest screws I have. Loosen the screws or unscrew it completely it spins with no problems. Only when it is fully secured.
Any help would be appreciated.
Thanks
LHI DX2205 2300KV
Not mounted they spin up fine. Soon as they are mounted it is as if the screws are stuck in the motor preventing it turn well. The screws are not in the motor. I even used shortest screws I have. Loosen the screws or unscrew it completely it spins with no problems. Only when it is fully secured.
Any help would be appreciated.
Thanks
