Electric Motor,battery,Prop for Mini Bell
10-08-2003, 12:43 PM
#1
Junior Member
Thread Starter
Join Date: Nov 2002
Location: Plover,
WI
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Electric Motor,battery,Prop for Mini Bell
The Peck Polymers Mini Bell was designed for a Cox Pee Wee .020.
What electric setup would you suggest?
The specifications are:
Wing span 25"
Wing Area 100" sq. in.
Flying weight 8-10 OZ (assumed to be with a .020 and older Cannon radio gear)
I was thinking the Wattage 180 motor and direct drive prop from their 180 cub may be about right with 6 cell 2/3 NiMh 370 battery, but am guessing. I based this idea on the wing span and weight of the cub.
THX
Harvard
What electric setup would you suggest?
The specifications are:
Wing span 25"
Wing Area 100" sq. in.
Flying weight 8-10 OZ (assumed to be with a .020 and older Cannon radio gear)
I was thinking the Wattage 180 motor and direct drive prop from their 180 cub may be about right with 6 cell 2/3 NiMh 370 battery, but am guessing. I based this idea on the wing span and weight of the cub.
THX
Harvard
10-09-2003, 01:57 PM
#2
Senior Member
RE: Electric Motor,battery,Prop for Mini Bell
I was going to recommend a GWS IPS geared motor for your power system but it looks like someone already tried it and likes it.
For details, go [link=http://www.geocities.com/minircplanes/minibell.html]here[/link].
Good luck!
For details, go [link=http://www.geocities.com/minircplanes/minibell.html]here[/link].
Good luck!
