rcflyer2

My Feedback: (6)

Hi,
We here at Littlescreamers are proud to introduce our final production design.
This is a totally custom motor from the ground up, Not another CD-rom motor!
Machined from lightweight aluminum on CNC equipment to very tight tolerances for smooth running.
Our motors have custom "Liscenced" N50 curved segment magnets to completely fit the bell, giving us massive cogging, a very tight air gap which keeps the stator as close to the magnets as it rotates, this keeps our motors highly efficient!
Each motor will be equiped with a removable firewall mount (with set scerew)and a retaining clip on the shaft, (though the can will not lift or budge under power) Motors can be ran in either pusher or tracker configuration.
Motor weight is 23g with mount and 21g without mount.
These will not be a kit they are ready to run motors.
MSRP will be $49.99

Tests ran on 3s1p
7x3.5 prop
A=3.5
V=10.8
W=39
RPM=10,440
Thrust=13oz


8x4.3 prop
A=5.6
V=9.9
W=56
RPM=8,370
Thrust=14oz

Scott
Littlescreamers.com