Any prop adapters fit most motors?
#1
Senior Member
Thread Starter
Join Date: Oct 2003
Location: Burnaby ,
BC, CANADA
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Any prop adapters fit most motors?
i got lots of motors 380's,400's , is there a prop adapter i can use with those motors. i dont wana use gearboxes and spurs. Any prop adapter that tightens a prop directly to the motor?
#2
Senior Member
My Feedback: (1)
Join Date: Feb 2004
Location: Nevada City ,
CA
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
RE: Any prop adapters fit most motors?
yup, heres some, you can find these other places too, and maybe even at your hobby shop
http://www.allerc.com/index.php?cPath=36_61
http://www.allerc.com/index.php?cPath=36_61
#3
Senior Member
My Feedback: (2)
Join Date: Sep 2004
Location: Johns Creek,
GA
Posts: 7,457
Likes: 0
Received 0 Likes
on
0 Posts
RE: Any prop adapters fit most motors?
You just need to know the diameter of the shaft...
don't forget that you usually can't just remove a gearbox and pop on the same size prop....
the gearbox allows the system to produce more torque....
depending on the motor, you usually need to go with a smaller prop if you use it as a direct drive.......
don't forget that you usually can't just remove a gearbox and pop on the same size prop....
the gearbox allows the system to produce more torque....
depending on the motor, you usually need to go with a smaller prop if you use it as a direct drive.......