Trouble choosing motor and prop for this 3D aeroplane
10-01-2005, 11:59 PM
#1
Member
Thread Starter
Join Date: Feb 2005
Location: Balwyn NorthVictoria, AUSTRALIA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Trouble choosing motor and prop for this 3D aeroplane
G'day all,
I am going to get a "Phoenix Magic" aeroplane.
It has a 1050mm wingspan, is balsa and described as "super light weight."
[link=http://www.modelengines.com.au/ME%20News/NB%20Sept%202005web.pdf]You can see a picture of it here on page 3[/link]
I will be using this aeroplane to practise 3D, mainly hovering initially and using 3S LiPos, capacity undetermined.
I have some Himark outrunner brushless motors to choose from which are similar/the same as AXI motors and I don't really know which one to use.
56grams
C2812-20 1200Kv
C2812-26 960Kv
C2812-24 720Kv
44g
C2808-34 1080Kv
C2808-26 1360Kv
C2808-20 1720Kv
Which one would be best for this type of model and with what propellor?
Thanks,
Tom
I am going to get a "Phoenix Magic" aeroplane.
It has a 1050mm wingspan, is balsa and described as "super light weight."
[link=http://www.modelengines.com.au/ME%20News/NB%20Sept%202005web.pdf]You can see a picture of it here on page 3[/link]
I will be using this aeroplane to practise 3D, mainly hovering initially and using 3S LiPos, capacity undetermined.
I have some Himark outrunner brushless motors to choose from which are similar/the same as AXI motors and I don't really know which one to use.
56grams
C2812-20 1200Kv
C2812-26 960Kv
C2812-24 720Kv
44g
C2808-34 1080Kv
C2808-26 1360Kv
C2808-20 1720Kv
Which one would be best for this type of model and with what propellor?
Thanks,
Tom
