speed 400 Olympus 2.33:1 gear system
12-08-2005, 01:34 PM
#1
Member
Thread Starter
My Feedback: (16)
Join Date: Jun 2002
Location: Homosassa,
FL
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
speed 400 Olympus 2.33:1 gear system
I have an olympus speed 400 2.33:1 gear drive. My problem is one of the pinion gear mounting setscrew/grub screw has stripped out.
Does anyone either had a spare pinion or know where I can get one short of ordering a new system??
Any help would be appriciated.
Gloria Wells
Does anyone either had a spare pinion or know where I can get one short of ordering a new system??
Any help would be appriciated.
Gloria Wells
12-13-2005, 11:11 PM
#2
Junior Member
Join Date: Dec 2003
Location: Birchwood, WI
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
RE: speed 400 Olympus 2.33:1 gear system
Would drilling and tapping for a larger set screw be feasible. Seems I did that last year. My local hardware store had mm set screws, and tap.
12-13-2005, 11:41 PM
#3
Member
Thread Starter
My Feedback: (16)
Join Date: Jun 2002
Location: Homosassa,
FL
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
RE: speed 400 Olympus 2.33:1 gear system
If it was metal that would be an out. But it is nylon and not sure if it would help.
Thanks for the idea.
Gloria
Thanks for the idea.
Gloria
