RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Brushed/Brushless motors, speed controls, gear drives (https://www.rcuniverse.com/forum/brushed-brushless-motors-speed-controls-gear-drives-123/)
-   -   Motor quitting (https://www.rcuniverse.com/forum/brushed-brushless-motors-speed-controls-gear-drives-123/11585917-motor-quitting.html)

M113apc 08-29-2013 11:52 AM

Motor quitting
 
I ran my new motor for the first time, after throttling up the motor quit after a few seconds.I throttled down and then up again and the motor quit again after a few seconds...???

nellsey 08-29-2013 04:09 PM

What sort of motor is it?

M113apc 08-29-2013 04:24 PM

Alpha Series 400

M113apc 08-29-2013 06:44 PM

It's an ExceedRC Alpha 400

AMA 74894 08-30-2013 06:40 AM

moving this thread to the appropriate forum.. this one is the general 'FAQ's for how RCUniverse works'

Dr Kiwi 08-30-2013 03:33 PM


Originally Posted by M113apc (Post 11603409)
I ran my new motor for the first time, after throttling up the motor quit after a few seconds.I throttled down and then up again and the motor quit again after a few seconds...???


What battery do you have.. those symptoms suggest that your battery voltage is dropping too far and you are hitting LVC.


.. or that your ESC is set for 4s when you are using 3s, [or set for 3s when you are using 2s] and the voltage is too low from the outset.

M113apc 08-30-2013 03:54 PM

I have a powerwing 1500 with a 20 amp esc.

Handiman 10-09-2013 11:03 AM

The motor has a max draw of 23 amps and continuous of 19 amps.
You should always have a speed control that has a higher amp rating than the motor being used.

Here is a thought, how many cars would a manufacture sell if they only used a motor that would only allow the car to max out at 50 mph?
And if you tried to drive 55 it would quit or blow up.

You can fly it at half throttle.

Good Luck.

Dr Kiwi 10-09-2013 01:29 PM

We need more info: What is the Kv of that motor, what cell count pack is your Powerwing 1500, what prop are you using?


All times are GMT -8. The time now is 10:19 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.