robarts retract binding
I am having problems getting the gear to retract. replaced with new actuator new pin and brass fitting plus new trunion. the actuator moves up approx 1/4 " and stops. are there any adjustments I should check. Could the problem be with the grove when in the gear down lock position. I did break the trunion during hard landing. AC IS THE TOP FLIGHT 86.5 SUPER MARINE SPITFIRE.
THANKS FRANK |
Look very carefully to ensure the retract is mounted flat.
Remove it from its mount and see if it binds |
Thanks for quick reply. upon removing the gear i found the trunion pin tight, and the pin/torx holding the bass cam roller was at the high point of the side frame. When I removed the trunion pin the actuator worked all the way, up and down.
|
All times are GMT -8. The time now is 05:19 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.