RCU Forums - lipo v-level

RCU Forums (https://www.rcuniverse.com/forum/)

- Brushed/Brushless motors, speed controls, gear drives (https://www.rcuniverse.com/forum/brushed-brushless-motors-speed-controls-gear-drives-123/)

- - lipo v-level (https://www.rcuniverse.com/forum/brushed-brushless-motors-speed-controls-gear-drives-123/8760204-lipo-v-level.html)

Switch_639

05-11-2009 03:10 PM

lipo v-level

if I have a 7.4V Lipo which peak charges till 8.44V... and I have a battery voltage check... what level can it drop to before I need to charge? basically my remote has an alarm which I want to set...

guver

05-11-2009 05:45 PM

RE: lipo v-level

It will depend a lot on the amount of load being pulled at the time, but in any case a resting voltage of 7.4 is essentially discharged.

sportygreg

05-20-2009 10:30 AM

RE: lipo v-level

Basically,you don't want to discharge lipos below 3V per cell or damage will be likely.

All times are GMT -8. The time now is 07:49 AM.