Fun Factor Dogbones
 

http://cgi.ebay.co.uk/ws/eBayISAPI.d...MEWA%3AIT&rd=1

Will thease fit the front of my Fun Factor? Due to the fact that the ones on now seem to have a ball joint at the end so the wheels can pivot.

RE: Fun Factor Dogbones
 

They are for the rear, but they will probably still work on the front but you would need some rear wheel axles (GX15) to up there as well. Dont take my word for it tho, test it out yourself by changeing the rear stuff you have now to the front and see if it works ok (Steering especially).

RE: Fun Factor Dogbones
 

Dogbones work but they make the steering rough. You will deinately ned the rear axles like azzman says

RE: Fun Factor Dogbones
 

So can anyone find me the part number for the FRONT dogbones with the ball joint? It must be a standard part.

RE: Fun Factor Dogbones
 

ffs003

RE: Fun Factor Dogbones
 

Thank you m8.:D

RE: Fun Factor Dogbones
 

Call Cen and ask them if the Magnum cvd's are any different, the may be improved on?

RE: Fun Factor Dogbones
 

The Magnum NX shares the same CVS with the MT2 in the front. Part # is FFS003. THe outdrive is dfferent. Magnux outdrive has a longer design FF232