Will it work?
 

I have a Fun Factor MT with a 1 speed that I want to upgrade to a 2 speed. When I was searching on ebay, somebody had a complete 2 speed assembly off of a Magnum. All I want to know is will the Magnum 2 speed fit into my Fun Factor? And, if it won't, is there a place I can get a complete Fun Factor 2 speed kit for under $100(that's what I've seen on all Cen parts retail places). I am NOT going to put a 4wd kit on my truck. An immediate responce would be appreciated.

RE: Will it work?
 

Magnum and NX 2 speed should drop straight in, I believe, its basically the same truck with a few upgraded parts and a longer chassis as stock, mate.

Anyone else?

RE: Will it work?
 

Thanks poor judgement. Now I have hope of making my truck go faster (while not breaking parts in the process;). Also, that same person has a complete clutch assembly(clutch bell, shoes, bearing, screw, nut, and flywheel) that goes on the NX .18. Will this fit the old .16, or will I have to just get a 2 speed clutchbell for a .16?

RE: Will it work?
 

They are the same and it will bolt right on :D

RE: Will it work?
 

Thanks alot Cen Racing, and thanks again poor judgement for giving me very helpful advise. Now I will be able to enjoy my MT even better than before. I don't know what I would have done if there weren't forums as knowledgeable on the Internet as this one. It really is a quite nice.:D:D:D

RE: Will it work?
 

Theres loads of info on here mate, have a search and you will find the most common issues, with these trucks if not all in here. Just remember the FunFactor, although gayly named, is just about exactly the same as your truck.

If it helps, theres a link in my signature below to a little site I made which covers a few upgrades, copy and paste it into your address bar.

Good luck with the truck.

RE: Will it work?
 

Try this it is the complete kit with every thing needed,

http://www.toyhaus.com/Merchant2/mer...Category_Code=



rolland

RE: Will it work?
 

Thanks for the link rolland, that is the excact kit I need. But, $80 dollars is a little rich for my taste, especially since I only paid $200 for the truck brand new. However, thanks again for that link. Atleast now I know the part number for a complete kit so I can search the net for something cheeper.