RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   CEN Racing (https://www.rcuniverse.com/forum/cen-racing-310/)
-   -   NEMESIS OUTDRIVES ISSUE (https://www.rcuniverse.com/forum/cen-racing-310/5358329-nemesis-outdrives-issue.html)

blackrain 02-01-2007 09:44 PM

NEMESIS OUTDRIVES ISSUE
 
IS THERE A UPGRADE for the outdrives on the nemesis my center outdrives are worn out real bad lots of slop and binding on the metal brake pads. The front and rear also look a little worn out

The Real Dogman 02-01-2007 10:59 PM

RE: NEMESIS OUTDRIVES ISSUE
 
Hey blackrain,
Yeah I have the same issue, I really wish cen had a universal swing shaft coming out of the tranny but a better hardened output would help. been thinking about switching to the plastic drive shafts both front and rear. however I would have to change to the genesis or gst tranny, but I like the bigger output bearings of the nemesis tranny, so...

blackrain 02-01-2007 11:16 PM

RE: NEMESIS OUTDRIVES ISSUE
 
so there arent any upgraded ones these are still the original ones since i bought my nemesis over a year know.

blackrain 02-01-2007 11:27 PM

RE: NEMESIS OUTDRIVES ISSUE
 
how many have you gone threw

s5lin 02-01-2007 11:58 PM

RE: NEMESIS OUTDRIVES ISSUE
 
if there the same ones from a year ago, I'd say thats pretty good life if you've been driving your truck frequently. A lot of racers I know will change their outdrives on their car after only 2-3 months of weekly club racing. And I have seen the outdrives they use, theres only a tiny groove forming and they toss them.

The center on mine have a tiny groove, but nothing major yet. Front and rear, so far so good.

blackrain 02-02-2007 12:21 AM

RE: NEMESIS OUTDRIVES ISSUE
 
your right, ive bin driving this thing for a long time and i like to punch it hard this is actually the third motor im on know. i had the stock engine then a lrp spec 2 and now a nova .28

The Real Dogman 02-02-2007 06:59 AM

RE: NEMESIS OUTDRIVES ISSUE
 
I have gone thru a set on the rear(outdrive on the the trany and all three at the diff) but I have run mine for about a year..

So not bad life..I had to spend about $60 to replace them, not good!!!High wear items need to be cheaper than that..but its only money I guess I spend that on hop-ups anyway, so....


BTW Nemesis owners wait till you see the new mod I'm working on,,A hint would be, check out how smooth your brake shafts are not when useing the GST 7.7 style return spring..more on that when a couple parts arrive......

Supertronic Systems-Malta 02-02-2007 10:27 AM

RE: NEMESIS OUTDRIVES ISSUE
 
CEN will warranty the outdrives as they know that they are weak.

The Real Dogman 02-02-2007 06:10 PM

RE: NEMESIS OUTDRIVES ISSUE
 
Super, Are you sure they will warranty parts on a truck thats 1 year old?? Or Should I not tell them its a year old?? Not!!

notch 02-02-2007 07:01 PM

RE: NEMESIS OUTDRIVES ISSUE
 
These items at a year will be deamed "normal wear and tear" and will not be covered under warranty

The Real Dogman 02-02-2007 07:05 PM

RE: NEMESIS OUTDRIVES ISSUE
 
Thank you Notch, exactly my point!! Besides worn drivetrain parts 1 year old is damn good in my opinion.

notch 02-02-2007 07:08 PM

RE: NEMESIS OUTDRIVES ISSUE
 
We try to help our consumers as much we can... but lets not get greedy- we here at cen take pride in our customer service and always try to do whats fair as we stand behind our products and consumers!!:)


All times are GMT -8. The time now is 04:36 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.