nemesis with 8t wheels
 

heres a pic of my nemesis switched to 17mm adapters and losi 8t wheels, will be putting the picco 28 in next. http://i96.photobucket.com/albums/l1...OFHOUSE027.jpg

RE: nemesis with 8t wheels
 

i would love to see a lcg chassie just to drop the engine lower

RE: nemesis with 8t wheels
 

blackrain,

Is that a Cen engine in this Nemi? Also why do you run single shocks, because of the pipe header? What pipe, how does it work?

Thanks,
Don

RE: nemesis with 8t wheels
 

i run a .28 its a lrp spec 3 with jp1 pipe i can run 4 shocks because the truck is much lighter now

RE: nemesis with 8t wheels
 

Blackrain,

Would the header clear if you were to run the forward shock next to the header?

Thanks,
Don

RE: nemesis with 8t wheels
 

no not with the pipe im running,

RE: nemesis with 8t wheels
 

Blackrain,

How did you install 17mm adapters on the Nemesis.?

RE: nemesis with 8t wheels
 

they actually were a direct fit, i bought some sportwerks 17mm adapters and pins. im shore you can use any buggy or truggy 17mm adapters should work fine.

RE: nemesis with 8t wheels
 

only areas on my truck that could use some more weight shaving is the driveline and radio box

RE: nemesis with 8t wheels
 

hey dogman check this out
http://i96.photobucket.com/albums/l1...OFHOUSE028.jpg

RE: nemesis with 8t wheels
 

heres another
http://i96.photobucket.com/albums/l1...OFHOUSE029.jpg

RE: nemesis with 8t wheels
 

Hey Blackrain,

Could you upload a couple pics with the body on?

RE: nemesis with 8t wheels
 

Hey Blackrain,, Thats saweet brother!!! How light is it now??? Gotta be getting pretty svelt...

Looks like it might be time to get out the dremel and get rid of some "fat" here and there!! RC-Lipo-Style!!!

Ever try the carbon fiber side plates?? I think it was [link=http://outfrontframes.com/cart/index.php?main_page=product_info&cPath=75&products _id=251]Outfront Frames that had them..[/link]

RE: nemesis with 8t wheels
 

hey dogman thats a good find on the carbon fiber chassie, i might try that company out. I know hole shot engineering makes some side plates. i had a bad experience with the carbon from hole shot so i was scared to try it. This company may be worth a try, i only have old pics with the body on.

RE: nemesis with 8t wheels
 

i bet it picks up quicker now with those smaller wheels. it probably robs you of your top speed though.

RE: nemesis with 8t wheels
 

i actually have more topend, because the .28 rev s a lot higher than the .46