Got a CEN Matrix
 

Well I sold my Savy yesterday and now have on order a Matrix arena tr. I ordered this as a roller, it is new minus electrics and motor. So I ordered some high torque servos for throttle and steering, a Axial .28 spec one, OFNA tuned pipe JP2 polished, and a Spektrum Tx/Rx. All this was only $580, is there any thing else I might want to get for this? Are there weak or bad areas on this truggy? Thanks for any help.

RE: Got a CEN Matrix
 

No, The arena is a solid truggy and a well race contender.[>:] It can hang with the best of them!!![>:] You might just want to change the front c-hub carrier and the steering hub and upgrade on that part. That is all!![sm=thumbup.gif] I all most for got, Change the upper steering bell crank were the steering servo connects too. Change to aluminum. The stock one is weak it will break!!!

RE: Got a CEN Matrix
 

I would get mxs41, mxs13, mxs23 to start out. Once you have all that, you will do great on the track. I also use the 1/2 offset proline rims with bowties or crimefighters depending on the surface.

RE: Got a CEN Matrix
 

clermont try using 0 offset you will be able to get a tighter turning radius