|
Baby classic pattern planes are here!
<span class="Apple-style-span" style="font-family: Arial; ">The 'Baby' 65% pattern kits are finally here! The Troublemaker is ready, and the Banshee and Mach One are about done, now that I've finalized a few design things I've been working with that will apply to all. They will be full kits, not short kits. Foam wings that duplicate the original, flat tail surfaces. Staying with the 65%, not a standard wing span, to keep differences between the planes. They will be happy with a .15 to .25 2c, or the equiv electric motor.</span><div style="margin-top: 0px; margin-right: 0px; margin-bottom: 0px; margin-left: 0px; padding-top: 0px; padding-right: 0px; padding-bottom: 0px; padding-left: 0px; background-image: initial; background-attachment: initial; background-origin: initial; background-clip: initial; background-color: rgb(255, 255, 255); font-family: Arial; font-size: 12px; "><div></div><div>The Baby Eyeball will have an Eyeball wing, not the Ace one size fits all wing, the same goes for the Mach One. It won't be a Mach None.
<div></div><div>Here is the link to the Baby kits: http://www.eurekaaircraft.com/airplanes/babykits.htm</div></div><div></div><div></div><div>Don</div><div>www.eurekaaircraft.com</div><div></div></div> |
RE: Baby classic pattern planes are here!
no pictures of kits/planes on the site?[&:]
|
RE: Baby classic pattern planes are here!
Very cool. I might have to get one of these.
|
RE: Baby classic pattern planes are here!
Patience, grasshopper....LOL I'm getting ready to put them up in a few...
Don . ORIGINAL: vasek no pictures of kits/planes on the site?[&:] |
RE: Baby classic pattern planes are here!
Can't wait to see the Currare[8D]
Yes pictures please! |
RE: Baby classic pattern planes are here!
Pics are up on the site of a Baby TM in the bones. That should answer a few questions.
Don<br type="_moz" /> |
RE: Baby classic pattern planes are here!
Is the Mach One available now? Perfect park flyer for (excuse me) electric when the Pres comes to town and they close all of the model fields.
Chris... |
RE: Baby classic pattern planes are here!
Just AWESOME Don! E-Flites new electric retracts are a must for these kits!!!
|
RE: Baby classic pattern planes are here!
More progress. Got the Banshee ready to cut, but the plans still need some work. That will be the slowdown on the getting these ready. Finishing the plans takes longer than getting all the parts ready :( The Mach One is about at the same stage as far as parts, but it's plans need a LOT of finishing.
Working on finding canopies that are close enough to the original to work, which will be easy on most of the planes. The TM doesn't have one, so no problem.;) The Banshee and the Mach One will be the hardest to find, so plugs will have to be made. It figures I'd pick them first... Don |
RE: Baby classic pattern planes are here!
Don,
Congratulations on the new kits. Like to have one of those myself Dan Carolina Custom Aircraft |
RE: Baby classic pattern planes are here!
Yourthe manDon.
You can figure out what we need before we can! Thanks for getting these out. Those electric Retracts.... Damn right! Those would be awsome! DM |
RE: Baby classic pattern planes are here!
baby banshee might be the thing I need to get me working on my 'glass banshee.
|
RE: Baby classic pattern planes are here!
Update.....
Got the Banshee and the Mach One ready to cut. Still need to work with the plans some more. As I said, that will be the hold up. Plans are ready to build with, but not up to kit standards. May release them that way and work on the plans as time goes by, which will allow more different planes. What do you all think? Am switching to 1/16" sheeting for the wings. Got a lot of comments about the 1/32" balsa being too thin to work with at LE and TE. not staying glued down. It is pretty thin ;) May offer either one when you order, even though the weigh penalty for 1/16" is a non-issue. Still looking for Banshee and Mach One look-a-like canopies that will fit. Will supply plans for a built up Banshee canopy for the time being. 2 1/16" ply sides, and a balsa to. The original Banshee had a built up cowl until J&J started kitting it. Don www.eurekaaircraft.com <br type="_moz" /> |
RE: Baby classic pattern planes are here!
Finally! I think I might have to try my hand at building an electric Curare. Any idea on what size Lipo a plane like that would need? What I'd love to see next is an EPO foam parkflyer size, but I'm probably alone here!
|
RE: Baby classic pattern planes are here!
The Banshee, and Mach one are now up on the site. Temporarily with out clear canopies, but there is a PDF of the original Banshee canopy on the site, scaled to fit the Baby Banshee. Very simple and looks great. It can also be lengthened a bit to fit the Mach One pretty close. It is what I will use for the eventual plug for a clear canopy.
I figure it is better to have planes to fly without clear canopies, than no planes at all :) They will come in time. There is also an INTRODUCTORY SPECIAL price an all baby kits till the end of the year! Going to do the Curare & Nutcracker next. After that, let me know what you want to fly! Don @ EAC http://www.eurekaaircraft.com/airplanes/babykits.htm<br type="_moz" /> |
RE: Baby classic pattern planes are here!
Don,
Got a question. The page says "All wings are sheeted with the supplied 1/32" balsa to keep things light." Does that mean the wings are sheeted when they arrive, or that you're supplying the 1/32" sheeting? If the latter, what width? ie, will we need to splice them or are they wide enough to do the full panels? The Curare interests me. Thanks. Andy |
RE: Baby classic pattern planes are here!
Hey, Andy....
Good question.. I just rephrased that on the site. I figured the ' with supplied sheeting' would convey that, but maybe I was wrong ;(They do not come sheeted, and will come stock with 1/16" sheeting, with 1/32" sheeting available on request. Yes it needs to be seemed and cut before sheeting, 4" wide balsa. Too many servo/LG options to pre-sheet. I switched to 1/16" as stock sheeting due a few comments that 1/32" sheeting can be a pain to work with, having issues at LE and TE if you aren't very careful sanding LE and TE. There just isn't much wood there. Don ORIGINAL: AndyKunz Don, Got a question. The page says "All wings are sheeted with the supplied 1/32" balsa to keep things light." Does that mean the wings are sheeted when they arrive, or that you're supplying the 1/32" sheeting? If the latter, what width? ie, will we need to splice them or are they wide enough to do the full panels? The Curare interests me. Thanks. Andy |
RE: Baby classic pattern planes are here!
Have you considered producing the TIPORARE & DECEPTION ?
|
RE: Baby classic pattern planes are here!
The Tipo is definitely near the top of the list. It will follow the Curare and the Nutcracker.
Hadn't thought about the Deception, but I will add it on the to do list. One of the Kaos' will be there, probably Super Kaos, but probably only one since there are so close. Shrunk down I don't think there will be enough difference. Dirty Birdy is also planned already. I will try to do all the pattern kits I do in the .60 size, and a few others people want. Don ORIGINAL: alcarafa Have you considered producing the TIPORARE & DECEPTION ? |
RE: Baby classic pattern planes are here!
Doxilia ( forum ID ) sent me PDF plans for a 15 / 25 deception once, outstanding plane to produce also, if he dont mind I can send you the plans for it.
|
RE: Baby classic pattern planes are here!
I've seen those plans.. I am doing a redesign onthese Baby pattern planes to make them lighter, and simplify construction, and lower part count. Most of the smaller versions out there build too heavy, since they are very close to the same construction of their big brothers, using 35+ year old building methods. The re-scaled Tipo is a good example of 60 size construction not working when made smaller. It came out way too heavy. Instead, I am taking their outlines, and lightening the construction.
Don<br type="_moz" /> |
RE: Baby classic pattern planes are here!
ORIGINAL: dfturnock Hey, Andy.... Good question.. I just rephrased that on the site. I figured the ' with supplied sheeting' would convey that, but maybe I was wrong ;( They do not come sheeted, and will come stock with 1/16'' sheeting, with 1/32'' sheeting available on request. Yes it needs to be seemed and cut before sheeting, 4'' wide balsa. Too many servo/LG options to pre-sheet. I switched to 1/16'' as stock sheeting due a few comments that 1/32'' sheeting can be a pain to work with, having issues at LE and TE if you aren't very careful sanding LE and TE. There just isn't much wood there. Don Thanks for the quick reply, Don. Next question - are the cores set up for square/shaped LE stock, or for wrapping all the way around? I prefer wrapping myself but I know others prefer the older way. As for "too many servo/LG options" why not just standardize on the E-Flite electrics? (Yes, I'm biased) Andy |
RE: Baby classic pattern planes are here!
Actually. I think wrapping may be the older way, according to some old plans I've worked with ;) They will be cut with a flat LE , unless someone wants the rounded LE, that's no problem. I can also cut the wing for sheeted, then cut out ailerons, instead of wood ailerons, if so desired. Just ask.
What does electric have to do with either issue? Some people will want 2 servos in the wing, and other will be very happy with just one servo on a plane that size. Electric has nothing to do with retract versus fixed gear, and electric has nothing to do with trike versus tail dragger. I guess I have no problem keeping an open mind :):) I don't care how people build or modify my stuff, I just work here. Don ORIGINAL: AndyKunz ORIGINAL: dfturnock Hey, Andy.... Good question.. I just rephrased that on the site. I figured the ' with supplied sheeting' would convey that, but maybe I was wrong ;(They do not come sheeted, and will come stock with 1/16'' sheeting, with 1/32'' sheeting available on request. Yes it needs to be seemed and cut before sheeting, 4'' wide balsa. Too many servo/LG options to pre-sheet. I switched to 1/16'' as stock sheeting due a few comments that 1/32'' sheeting can be a pain to work with, having issues at LE and TE if you aren't very careful sanding LE and TE. There just isn't much wood there. Don Thanks for the quick reply, Don. Next question - are the cores set up for square/shaped LE stock, or for wrapping all the way around? I prefer wrapping myself but I know others prefer the older way. As for "too many servo/LG options" why not just standardize on the E-Flite electrics? (Yes, I'm biased) Andy |
RE: Baby classic pattern planes are here!
Don,
good points raised. Given you can offer the "cut" of the cores to the buyers taste, will it also be an option for you to make wheel wells and servo cutouts? That would really expedite the build if the cores were already pre-welled. I'm thinking conventional retracts on these puppies given their size if any at all. If the models were 48" span size then it would be another story. Thanks, David. P.S. Now I just have to decide which one to order but I think the K&B 18 sitting in the box might have just found a home! |
RE: Baby classic pattern planes are here!
Are these planes that the average builder can build.
|
| All times are GMT -8. The time now is 12:09 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.