RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Classic RC Pattern Flying (https://www.rcuniverse.com/forum/classic-rc-pattern-flying-379/)
-   -   Typhoon 1000 (https://www.rcuniverse.com/forum/classic-rc-pattern-flying-379/11406369-typhoon-1000-a.html)

tgwhitley 02-11-2013 05:10 PM

Typhoon 1000
 
I have plans for the 1988 MV1 version along with the 2x2 and would like to obtain the plans for Typhoon 1000. Hope someone has scan or copy, link to build thread would be nice.

Thanks

Tim<br type="_moz" />

PatternPilot 02-11-2013 05:12 PM

RE: Typhoon 1000
 
Tim

Try jim Graham at rccity. Www.rccityfl.com

Scott

tgwhitley 02-11-2013 05:52 PM

RE: Typhoon 1000
 
Thanks Scott looking for all wood plan I like to scratch build on occasion.

Tim


mercura 02-11-2013 06:19 PM

RE: Typhoon 1000
 
Tim

Pretty sure the only differance between the MV-1 and the Typhoon 1000 is wing area. Both share the
same fuzz.

Dave

TonyF 02-11-2013 10:13 PM

RE: Typhoon 1000
 
No, they don't. Ron scaled up the entire airplane to get 1,000 squares. Maybe the glass ones that were sold just enlarged the wing, but the wood ones did not.

PatternPilot 02-12-2013 03:40 AM

RE: Typhoon 1000
 
I"m pretty sure Jim has the wood plans...as I had them at one point and then sold it all to Jim at RC City.

KLXMASTER14 02-12-2013 11:28 AM

RE: Typhoon 1000
 
1 Attachment(s)
Any idea which version this one is? It was built by Dick Belden, and uses an O.S. .160 for power. I want one.

-Robert

hobbyfun100 02-12-2013 01:46 PM

RE: Typhoon 1000
 
1 Attachment(s)
That is correct, both the 1000 &amp; 2+2 are totally different in size. I have both of the which were scratch built.

hobbyfun100 02-12-2013 01:49 PM

RE: Typhoon 1000
 
My Typhoon 1000 which is red, white, blue, yellow in color is powered by an Y.S 140L. The Typhoon 2+2 which is larger is powered by an Y.S 120

TonyF 02-12-2013 04:27 PM

RE: Typhoon 1000
 
Robert, Dick's is the Typhoon 2000. I know a company that has plans and laser cut parts for it. Here's the contact info,

Dan Walton
Laser Technologies
499 Blue Goose Rd.
Troy , Mo. 63379
636-462-7400 ph
636-528-2097 fax
[email protected]

KLXMASTER14 02-12-2013 08:34 PM

RE: Typhoon 1000
 


ORIGINAL: TonyF

Robert, Dick's is the Typhoon 2000. I know a company that has plans and laser cut parts for it. Here's the contact info,

Dan Walton
Laser Technologies
499 Blue Goose Rd.
Troy , Mo. 63379
636-462-7400 ph
636-528-2097 fax
[email protected]
Super cool! Thank you Tony!

-Robert

tgwhitley 02-12-2013 08:45 PM

RE: Typhoon 1000
 
Tony

Did the 2000 have same canopy as rest of the series of Typhoons? I know cowl was different but canopy looks same.

Tim


TonyF 02-12-2013 11:48 PM

RE: Typhoon 1000
 
I honestly do not know if the canopy was the same. Knowing Ron, it may well be the same.

I acquired Ron's prototype back in 1998 or 99. It flew very well but I had committed to flying the Giles 202.


All times are GMT -8. The time now is 09:47 AM.


Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.