Comming Soon All Wood Aurora 60 Kit
 

Hi All, This is just one of many more to come, i will be offering this short kit very shortly for those interested, the short kit will have all wing ribs all stab ribs fuse doublers all fuse formers and rudder parts you will be able to build this plane right over the original plans. Any questions please email me at:
[email protected]
Thanks Pat
Lasercut USA

What about canopy and belly pan?

Hi David, I have bin in touch with Don at rcaiir you can get the canopy and belly pan through him

Pat
Lasercut USA

Awesome, I like wood. Glad to see this option.

Thanks David, i should have the short kit ready in about 2 weeks i will post everything that will be included in the short kit

Pat
Lasercut USA

This is great news! I have an Aurora built from an original MK Kit. The airplane flys absolutely awesome. With Dons canopy and glass belly pan it should shed 1/4 pound and be even better.

Here are some of the parts you will get with the short kit,the way i was able to create these parts you will be able to build this plane right over the original plans.There is still more work i have to add it all should be done in about 2 weeks.

Pat
Lasercut USA

Comming Soon BLUE ANGEL Wood Short Kit
 

Hi All, this will be the next plane i will be offering here is some pic's.

Pat
Lasercut USA

Hi Patrick, will it also be possible to buy just the fuselage parts since i allready have wing and stab cores from Don , but would save me some time and effort to have all the parts for the fuse cut out and ready to go .
And how much is it going to cost more or less ?

Erik

Hi Erik, i am working on the pricing now it look's like the short kit is going to be around $175.00 i will get back to you on the fuse and fin and rud,( this is for the Aurora or Blue Angle//)

Pat
Lasercut USA

It`s for the aurora bought the belly pan and cores and canopy a while ago from Don but haven`t been looking forward to cutting out all the pieces by hand :)

Great i will get back with the pricing by this week end

Pat
Lasercut uSA

Hi Patrick, will you consider making a 45 sized Aurora too?

Hi Ferio, i someone has the plans they can send me sure why not.

Pat
Lasercut USA

Hi Patrick, I will drop an email shortly. thanks

Only issue would be reproducing the belly pan and canopy as they are different from the 60 size.

David

Indeed.

Guys I have the Aurora 45 belly pan also.

I guess that takes care of that problem LOL

Pat
Lasercut USA

Hi all, here are the cut parts for the Aurora. You can check for availabilty @ www.lasercutusa.com


Pat
Lasercut USA

http://www.rcuniverse.com/forum/atta...mentid=2053371 http://www.rcuniverse.com/forum/atta...mentid=2053372 http://www.rcuniverse.com/forum/atta...mentid=2053373

Fuse Sides and Doublers Wing and Stab Ribs Plywood Fuse Formers
and Rud Parts