RCU Forums - Name the Plane

RCU Forums (https://www.rcuniverse.com/forum/)

- Classic RC Pattern Flying (https://www.rcuniverse.com/forum/classic-rc-pattern-flying-379/)

- - Name the Plane (https://www.rcuniverse.com/forum/classic-rc-pattern-flying-379/8280256-name-plane.html)

rainedave

12-25-2008 12:01 AM

Name the Plane

1 Attachment(s)

This shouldn't take long. But, can RFJ name the magazine and issue in which it was published?

David

casniffer

12-25-2008 12:06 AM

RE: Name the Plane

I have no doubt that RFJ is up to the challenge.

CAsniffer

pimmnz

12-25-2008 12:42 AM

RE: Name the Plane

It is Doug Sprengs 'Stormer'. I have the magazine 'somewhere' but I'm betting RFJ will find it before I do, AAM I believe?
Evan, WB #12.

pimmnz

12-25-2008 12:49 AM

RE: Name the Plane

Flattop Stormer AM May 1962, so Stormer AM April 1961?
Evan, again!

rainedave

12-25-2008 01:05 AM

RE: Name the Plane

Yes, Spreng's Stormer from AM 4/61. Good job!

David

casniffer

12-25-2008 01:41 AM

RE: Name the Plane

Rainedave,
Specs?

CAsniffer

rainedave

12-25-2008 09:50 AM

RE: Name the Plane

Measured off plans:

WS - 64.25"
Length - 47.625"
Area - 780 sq." approx.
Engine - Lee/Veco .45

David

Free Bird

12-25-2008 04:19 PM

RE: Name the Plane

1 Attachment(s)

From the archives.

FB

RFJ	12-26-2008 08:39 AM

RE: Name the Plane

1 Attachment(s)

Doug Spreng - my favourite designer. His philosopy seemed to be - look at what everyone else is doing and do the opposite. Below is a short extract from the Stormer article. I hope Cees doesn't read this thread. Take cover:D

Ray

Free Bird

12-26-2008 09:01 AM

RE: Name the Plane

Quote:

ROFLMAO!!!!!

FB

All times are GMT -8. The time now is 08:26 PM.