hotmac club 40 race
#1
Thread Starter
Join Date: Dec 2008
Location: WACO,
TX
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
hotmac club 40 race
Club 40 racers ,race time in waco , april 20, hoping to have new digital light lap counter/ cut counter system usable at race time , club pres been working very hard on it , should be great! callers will be called on to count their racers laps via push button ,cut indicators under each lane lap readout , will be first time use (after tests ) so some patience will be appreciated , also my first try at being cd, we'll pull off race one way or another. check hotmac.org for details
#2
Senior Member
My Feedback: (7)
Join Date: Feb 2002
Location: League City,
TX
Posts: 597
Likes: 0
Received 0 Likes
on
0 Posts
RE: hotmac club 40 race
The new system sounds sweet. Myself and Mike Buckalew plan on making the drive up from Alvin forthis event.
Ted
As an FYI for any other out of towners coming in on Friday. I found a room with 2 dbl beds at Motel 6 @ 7007 Woodway Drive, Waco, Tx, 76712 for $44 a night for the online reservation price. Motel 6 is not fancy but in my experience, they are at least clean and best of all, You can't beat that price!
Ted
As an FYI for any other out of towners coming in on Friday. I found a room with 2 dbl beds at Motel 6 @ 7007 Woodway Drive, Waco, Tx, 76712 for $44 a night for the online reservation price. Motel 6 is not fancy but in my experience, they are at least clean and best of all, You can't beat that price!
#7
Join Date: Jun 2005
Location: georgetown,
TX
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
RE: hotmac club 40 race
Steve, I will be there and I’m pretty sure that Gary, Ken and maybe a few more. I will bring a paper matrix and scoring system with me just in case your computer gets stubborn. Since this is your first time as CD I will give all the help I can. You are aware that I ger a sinior discount of 15 seconds off my actual time.
Bob
Bob
#10
Thread Starter
Join Date: Dec 2008
Location: WACO,
TX
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
RE: hotmac club 40 race
Thanks for all the posts , hey ted , do you think any of you guys might get by randy ritches hobby shop between now and race in waco? bought an airplane thats there and would appreciate
it if it could hitch a ride , thanks for bringing the fuel , Ill check again tomorrow make sure plane is there ,if not no big deal ,later steve
it if it could hitch a ride , thanks for bringing the fuel , Ill check again tomorrow make sure plane is there ,if not no big deal ,later steve
#11
Senior Member
My Feedback: (7)
Join Date: Feb 2002
Location: League City,
TX
Posts: 597
Likes: 0
Received 0 Likes
on
0 Posts
RE: hotmac club 40 race
Steve,
Unfortunately Randys shop is an hour away(50+ miles)from my side of town and don't have any immediate plans to head that direction before the the Waco race.I'll ask around the field and see if anyone has plans on going to his shop between now and race day.
Ted
Unfortunately Randys shop is an hour away(50+ miles)from my side of town and don't have any immediate plans to head that direction before the the Waco race.I'll ask around the field and see if anyone has plans on going to his shop between now and race day.
Ted
ORIGINAL: stevebla
Thanks for all the posts , hey ted , do you think any of you guys might get by randy ritches hobby shop between now and race in waco? bought an airplane thats there and would appreciate
it if it could hitch a ride , thanks for bringing the fuel , Ill check again tomorrow make sure plane is there ,if not no big deal ,later steve
Thanks for all the posts , hey ted , do you think any of you guys might get by randy ritches hobby shop between now and race in waco? bought an airplane thats there and would appreciate
it if it could hitch a ride , thanks for bringing the fuel , Ill check again tomorrow make sure plane is there ,if not no big deal ,later steve
#14
RE: hotmac club 40 race
Hey Bob, We saw Jim DeYoung at Toledo Friday. He's flying, but not racing. I told him you were into Club 40. Let us know how the Pattern thing is working out? Greg
#15
Join Date: Jun 2005
Location: georgetown,
TX
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
RE: hotmac club 40 race
Greg, thanks for the feedback on Jim, we go back to the early 70’s. I raced a few of his QM Fokkers. They were faster than I was.
As for Pattern I came in dead last after crashing on landing in the first round. That Pattern stuff is harder than it looks, but it’s fun
Bob
As for Pattern I came in dead last after crashing on landing in the first round. That Pattern stuff is harder than it looks, but it’s fun
Bob
#16
RE: hotmac club 40 race
Bob,
I saw a lot of other old time racers too, but Jim DeYoung was someone who most of us hadn't seen in many years, and I knew you and he were friends. Also at Toledo were: Allen Booth, Jim Gager, Dan Kane Sr. (Jr. was supposed to be there Saturday) Dave Latshaw, Rick Moorland, Denny Sumner, Dicky, and Randy Rich, and of course Wayne Yeager.There were probably others that I've missed. With the right engine and prop, Jim's Fokker was one of the fastest QM's of all time. Greg
I saw a lot of other old time racers too, but Jim DeYoung was someone who most of us hadn't seen in many years, and I knew you and he were friends. Also at Toledo were: Allen Booth, Jim Gager, Dan Kane Sr. (Jr. was supposed to be there Saturday) Dave Latshaw, Rick Moorland, Denny Sumner, Dicky, and Randy Rich, and of course Wayne Yeager.There were probably others that I've missed. With the right engine and prop, Jim's Fokker was one of the fastest QM's of all time. Greg
#18
My Feedback: (2)
Join Date: Jun 2008
Location: Georgetown, TX
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
RE: hotmac club 40 race
Okay Club 40 racers just to shake up the mix a little for the Waco race I am bringing in one of the Midwest’s top USRA unlimited pilots to make it a little interesting!
#19
Join Date: Jun 2005
Location: georgetown,
TX
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
RE: hotmac club 40 race
Charles I’m having the second eye fixed Thursday, 9 days before the Waco race. It should be OK by race day. If I can’t see good enough to race I’ll call for you, [8D] that way you’re sure not to have any cuts.
Bob
Bob
#20
Senior Member
My Feedback: (7)
Join Date: Feb 2002
Location: League City,
TX
Posts: 597
Likes: 0
Received 0 Likes
on
0 Posts
RE: hotmac club 40 race
Wondering how the field test went, been awful quiet about it? We gonna have to race barefooted and count laps on our toes?
ORIGINAL: honkerbird
Bench tested system last Monday and all bugs seem to be worked out. Planning to test this Tuesday at the field.
Bench tested system last Monday and all bugs seem to be worked out. Planning to test this Tuesday at the field.
#21
Thread Starter
Join Date: Dec 2008
Location: WACO,
TX
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
RE: hotmac club 40 race
race time near,doesnt look like system is going to be usable , simple hard to find problem,still working on it but not counting on it, having trouble getting commitments from helpers but think we got it ok , may have to call on pilots to sit in sometimes , will make it happen steve
#22
Thread Starter
Join Date: Dec 2008
Location: WACO,
TX
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
RE: hotmac club 40 race
Looks like the light system is back in the saddle! steve found a corruption in system communication , problem fixed , going to try to break it in saturday , have backup system in case , Bring a jacket , going to be cool , steve