Information Required
 

Hi All,
I am after information on the Cox Conquest, Prop sizes, types of pipes and where to get them, and what RPM I should expect to get out of them. Any help would be greatfull.

Tar All.

RE: Information Required
 

Andrew:

RJL/MECoA/K&B now own the design, I think Randy has made a few, he might have a new one still on the shelf. And he is the source for any new parts that are not "Old stock" in a hobby shop somewhere.

You should also be able to get any info you want from him.

Bill.

RE: Information Required
 

Hi All,
Picked up two complete engines, 5 NIB unrun piston/cylinders, and a bag of about 100 glow heads. only missing tuned pipes, props. Got a web site for them?

Tar All.

RE: Information Required
 

Andrew:

It's in current production, didn't realize that when I made the earlier post.

Here's MECoA/RJL/K&B's link:

http://www.mecoa.com/rjl/index.htm

And here's the catalogue page, had to do it in two parts.

Bill.

RE: Information Required
 

William,
Thanks for the site Will check it out.

Tar.

RE: Information Required
 

Are you sure? For soooooo many years he's had it listed on the website, but if you'd order you'd never get anything. You'd never get charged either now, just it always felt like he was saving orders up until he got enough to make another run. If that took 4 years so be it.

Call em on the phone and verify they are ready to ship one to you, do NOT send them email.

RE: Information Required
 

Clean:

With Randy and Jim you're never sure until you open the box. And they do tend to hold the order until it can all be filled, instead of issuing a back order.

Bill.