RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Crash & Rebuild (https://www.rcuniverse.com/forum/crash-rebuild-96/)
-   -   Carnage caused by… spinner(?) pics (https://www.rcuniverse.com/forum/crash-rebuild-96/1960666-carnage-caused-%E2%80%A6-spinner-pics.html)

edh13 07-04-2004 05:10 PM

Carnage caused by… spinner(?) pics
 
1 Attachment(s)
Just after bragging on another thread somewhere that I haven’t brought one home in a bag for a long while, this happened. This was my tequila Sunrise .25 with a 32sx and a Macs pipe. Second flight this morning, coming out of a large lazy screaming split S, just got it leveled and lined up with the runway for a low fast down-wind pass when I heard a pop just coming over the fence. I pulled, banked away from the flight line and chopped the throttle. At least that’s what my thumbs did. The plane was totally unresponsive it continued down the runway at about 90mph and did a slow roll to the right and a shallow dive. Burned in full throttle at show center. It hit right wing tip first then motor and blew into a hundred pieces. I stepped of 24 paces, 70 feet or so, from where the wing tip hit to where the fuel tank ended up. Best looking crash I’ve seen in years.
The only clues:
1 - It was the spinner that made the loud pop. It sheared off the screw bosses and flew off. We found it at the fence. It also put a pretty big gouge in the LH wing as it flew off.
2 – The crystal was missing from my Electron Rx. The Rx is fine, no damage, but the crystal is just gone. Couldn’t find it anywhere.
Any ideas?
I’m guessing the crystal was about to fall out anyway and the spinner smacking the wing and maybe some increased vibration finished the job? The radio gear works fine, except for the throttle servo is toast. Clevises push rods all look fine. Didn’t hear any fluttering. Killed my .32 sx and the pipe. That psses me off.

EDH13

electricfan 07-04-2004 06:50 PM

RE: Carnage caused by… spinner(?) pics
 
wow. probably vibration. i was thinking of getting one of those. how does it fly and what kind of stuff can you do with it?

8178 07-04-2004 07:21 PM

RE: Carnage caused by… spinner(?) pics
 
I take it you had the receiver wrapped in foam and taped like all R/Cers do so it couldn’t have fallen out in flight. Thus, it must have come out after the impact that ripped the foam wrap off the receiver.

Righty 07-04-2004 08:00 PM

RE: Carnage caused by… spinner(?) pics
 

2 – The crystal was missing from my Electron Rx. The Rx is fine, no damage, but the crystal is just gone. Couldn’t find it anywhere.
Any ideas?
The crystal burglar and his goons at it again... just when you think your crystals are safe the burglar and his goons steal them!

Sorry for your loss though. looked like a great plane.

vicman 07-04-2004 08:16 PM

RE: Carnage caused by… spinner(?) pics
 
1 Attachment(s)
Blew the spinner in flight and the plane slowed by at least a third. Really throwing off my approach distance.[:@]

Windwalker 07-05-2004 08:13 AM

RE: Carnage caused by… spinner(?) pics
 
Sounds like a good argument for Vortech or Tru-Turn[:@]

WW

jboy381-RCU 07-06-2004 03:31 PM

RE: Carnage caused by… spinner(?) pics
 
that's why i use spinner nuts...

john

hoobi 07-06-2004 05:17 PM

RE: Carnage caused by… spinner(?) pics
 
1 Attachment(s)
my tequila Sunrise .25 with a 32sx and pipe

daveopam 07-06-2004 08:49 PM

RE: Carnage caused by… spinner(?) pics
 
I would guess the vibration(from whatever source) got the spinner off and the crystal out.

David


All times are GMT -8. The time now is 01:10 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.