RCU Forums - Brushless motor recommendation

RCU Forums (https://www.rcuniverse.com/forum/)

- E-Flight Power Sources (https://www.rcuniverse.com/forum/e-flight-power-sources-126/)

- - Brushless motor recommendation (https://www.rcuniverse.com/forum/e-flight-power-sources-126/2562673-brushless-motor-recommendation.html)

mackey1

01-20-2005 09:28 AM

Brushless motor recommendation

Looking for input on what motor to buy for my 18 oz 3D foamy. Presently have a speed 400 geared on it with 8 KAN 1050's.

I have a 25 amp CC ESC and will run a 3s1p Li-Po setup. I've been looking at the AXI motors but all the advertising just confuses me. Any thoughts will be appreciated.

777	01-20-2005 11:21 PM

RE: Brushless motor recommendation

Have you considered the Himax 2025-4200 with a gearbox? I have a similarly sized plane & when I went looking for a motor, this is what I settled on. This also allows the possibility of using different gearing options.

Brad

imback

01-22-2005 02:33 AM

RE: Brushless motor recommendation

mackey1:

an axi 2212/34 should work well. 11 x 4.7 prop!

nels

jooNorway

01-22-2005 09:19 AM

RE: Brushless motor recommendation

I would choose the 2808/24, a 9x4,5 prop leaving the motor eating appr. 20 Amp at max. Then you have enough power! With a 10x5 prop and 25Amp current it still works but it is overkill in your plane...

All times are GMT -8. The time now is 08:05 PM.