CX2 LiPO in Mini-T?
 

I already have a Blade CX2 heli and use Lipo batteries. I was going to get a good charger for them (FMA 4s) , but wondered if the LiPOs would work in the Mini-T I want to get for my kids. If not I have to consider another plan.

So will I have any problems using the E-Flite LiPOs in the Losi Mini-T?

Thanks!

RE: CX2 LiPO in Mini-T?
 

What electronics are you using in the Mini-T?
The lipo battery from the CX2 will not have enough MAH to power the Mini-T.

RE: CX2 LiPO in Mini-T?
 

yes, the CX2 7.4v Lipo and even the CP Pro 11.1v Lipo will work with the stock Mini T electronics! the only skills required are soldering and a brain... you'll have to figure out some type of universal connector, I for one have found Deans Ultra to fit my needs.

simply plug and play! however, if you upgrade your stock Mini T to Lipo's you'll find other break weak spots in the build... bearings to start, they are always good!

RE: CX2 LiPO in Mini-T?
 

Lookyj-- AHA ! So that's how ya got the Mini-T to jump that Honda Civic there on "You-Tube"...!...Lol...Ya probably had that 3-Cell in there! Alright, have a good one Jer- Jeff ;)

RE: CX2 LiPO in Mini-T?
 

yep, you got me...

3 cell over the civic!

what till you see the 11.1v in the CX2


have you seen the new CX2 package? includes the AR6100e and Alum upper head...
now that's one of the best starter packages, I've seen! just in time for Xmas

RE: CX2 LiPO in Mini-T?
 

Thanks for the answer. I'll stick to my plan then for the 7.2V LiPOs and I'll have to convert all the connectors. I'll also have to get an auto shutoff so that the girls can't run down the LiPOs too low.

Now I've got to splurge for the charger!