RCU Forums - Unplugged plug

RCU Forums (https://www.rcuniverse.com/forum/)

- E-Flite Helicopters (https://www.rcuniverse.com/forum/e-flite-helicopters-447/)

- - Unplugged plug (https://www.rcuniverse.com/forum/e-flite-helicopters-447/9585772-unplugged-plug.html)

stonefly71

03-15-2010 11:22 PM

Unplugged plug

the Unplugged Plug on the Sr what is it for? I thought I read about it in a post on here but for the life of me have NFI where it was at. Thanks Matt and FYI NFI stands For No F$%^&* Idea.

gi1mo2

03-15-2010 11:58 PM

RE: Unplugged plug

You must mean the plug with the single yellow wire to it. It comes from the Gyro, and if you had a controller such as a DX7, you could plug it in the receiver to the proper channel (Aux or Gear), and set the Gyro gain from the transmitter. Could potentially correct some of the tail twitching some people have reported (but I haven't tried). I did try on my CP Pro 2, and didn't see much advantage to setting gain on the gyro itself with the pod.

c9403

03-16-2010 02:04 AM

RE: Unplugged plug

Stone,

Isaw a youtube video where a guy said you can connect it up and use the channel 5 on the stock transmitter for the SR. I am still learning to control my SR and Iam by no means a wiring guy, Ijust fly em, crash em and rebuild em.

Chris

Link to the video:

http://www.youtube.com/watch?v=MoiCW89lSKI

All times are GMT -8. The time now is 07:54 PM.