UMX Timber leading edge slats
09-13-2017, 01:17 PM
#1
Thread Starter
Join Date: May 2011
Location: Allentown, PA
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
UMX Timber leading edge slats
Has anyone installed the UMX Timber leading edge slats on other airplanes? We have a few Timbers with slats at our club, they fly very well. I have a Hobbyking Bushmaster and am curious if these slats would improve the flight characteristics. Motion RC sells them for about $15.00. Thanks for any input.
Bill
Bill
09-13-2017, 04:21 PM
#2
My Feedback: (5)
Join Date: Oct 2009
Location: Northeast, PA
Posts: 3,975
Likes: 0
Received 0 Likes
on
0 Posts
Yes.
I flew it without the slats and found out what it could do. Flies very well.
I installed the slats and it improved the slow flying characteristics and slowed down the plane even more. It still flies well inverted and it still knife-edges well.
I flew it without the slats and found out what it could do. Flies very well.
I installed the slats and it improved the slow flying characteristics and slowed down the plane even more. It still flies well inverted and it still knife-edges well.
