Motor cuts out and back on
#1
Thread Starter
Motor cuts out and back on
Hi I have a plane powered with a Eflite 15, 40 amp esc and a 3200 4s, I'm not pushing it hard the esc, motor and Batt never get hot but when I'm flying it will randomly cut out and come back on in about a second, I think I still have control but it happens so fast it's hard to tell, never had this happen before, esc? Not a problem?
Thanks
Thanks
#2
Join Date: Sep 2002
Location: Nijmegen / Nederland
Posts: 628
Likes: 0
Received 22 Likes
on
17 Posts
That's a problem Dwayne, of the nasty kind because you want a problem to occur all the time, not sometimes.
Possible causes (not radio related) and solutions
Motor stuttering? Won't run? Read before asking. - RCG
Vriendelijke groeten Ron
Possible causes (not radio related) and solutions
Motor stuttering? Won't run? Read before asking. - RCG
Vriendelijke groeten Ron
Last edited by ron_van_sommeren; 07-15-2022 at 11:18 AM.
#4
Join Date: Sep 2002
Location: Nijmegen / Nederland
Posts: 628
Likes: 0
Received 22 Likes
on
17 Posts
What happens when you swap ESC with a servo channel Dwayne?
Does the problem move to other channel?
Prettig weekend Ron
• Without a watt-meter you're in the dark ... until something starts to glow •
• E-flight calculators • watt-meters • diy motor tips&tricks • Cumulus MFC •
Does the problem move to other channel?
Prettig weekend Ron
• Without a watt-meter you're in the dark ... until something starts to glow •
• E-flight calculators • watt-meters • diy motor tips&tricks • Cumulus MFC •
Last edited by ron_van_sommeren; 07-16-2022 at 09:48 AM.
#5
Thread Starter
Sorry guys I've been out of town, I switched to a 50 amp esc and the problem is gone, now do I try the other esc in another plane to see if the same thing happens? Umm how brave do I feel? LOL