Help no elevator on my new eurofighter
 

Anyone have any idea's on mixing...... everything elseworks rudder.motor, aileronjust no up or down only. I have a new Spektrum dx-5 radio and reciever in it I also switched the mixing switch to on still nothing. Any idea's? Thanks

RE: Help no elevator on my new eurofighter
 

I'm confused. You can not mix anything with a DX5 Transmitter? Need more info.

1. Do you have a DX5e transmitter?

2. Are you using a AR500 RX?

3. How do you have your servos set up and which servos do you have pluged into which channels?

RE: Help no elevator on my new eurofighter
 

The DX5e has delta wing (elevon) mixing.

One elevon servo goes in the aileron channel. The other goes in the elevator channel.

I suspect you have the two elevon servos plugged into the two aileron connections on the AR500 receiver. That won't work.

HUGE HINT: If you can't get the elevons to go in the right direction, no matter how you change servo reversing, try swapping the aileron and elevator plugs at the receiver.