Need help with EP J3 Electricub
I have Great Planes J3 Electricub with the standard motor/gearbox set up. I was looking to put something else in it to give it just a bit more power. Any suggestions on what to put in this plane?
SPECIFICATIONS Stock Number: GPMA1153 Wingspan: 41 in (1040 mm) Total Wing Area: 269 in² (17.4 dm²) Wing Loading: 7.5 oz/ft² (23 g/dm²) Weight: 14 oz (395 g) Length: 29.5 in (750 mm) Includes: 280 motor, 3.5:1 gearbox, ESC, 8-cell 9.6V 600mAh NiMH battery and 10x7 prop Requires: 3-4 channel radio w/2 micro or NanoTM servos and charger Here's a link to it on the Electrifly site: http://www.electrifly.com/discontinued/gpma1153.html |
RE: Need help with EP J3 Electricub
Couple of things to consider. To increase the performance you would want to go to a brushless set-up using lipo batteries. That would mean removing the gearbox set-up and making or buying a mount to install a brushless motor. Then add an ESC and a lipo battery . then you would need a charger capable of charging a lipo battery.
So the first question would be;do you have any electrics running lipo packs and a charger capable of charging them ? If so then you would be looking at spending around $60-70.00 on the low side to equip the plane with a new motor, ESC, LiPo battery and accessories. If you needed to buy a charger then add another $30.00 + for a basic "4-button" multi-charger. I would say something like a 2805 brushless 1300kva (Blue Wonder type)motor, 18 amp ESC, a 11.1v 1300mah LiPo , and a 9X4.75 prop. |
RE: Need help with EP J3 Electricub
If you look down thee is a thread about an elictricub. This is the power system I have and the one I recommended. Runs an APC 12X6 prop and have a lot more power and flight times. If you read the other thread, I laughed about the cleared work bench comments. :)
They are out of stock right now. They come and go fast. Battery http://www.hobbypartz.com/98p-25c-2200-3s1p.html Motor http://www.hobbypartz.com/96m601-big...20-1100kv.html ESC http://www.hobbypartz.com/07e06-proton-60a.html http://www.hobbypartz.com/07e-flyfun-60a.html Here is the link to the other thread. It may answer some of your questions. http://www.rcuniverse.com/forum/m_11434397/tm.htm Buzz. |
RE: Need help with EP J3 Electricub
Blvdbuzzard, thanks for the pointer but this is the smaller Electricub - only 41 inch wingspan.
|
RE: Need help with EP J3 Electricub
Brian Ray, thanks for the info...I'll poke around with those specs and see what I can come up with.
|
RE: Need help with EP J3 Electricub
I saw the electri cub and ran with it.
For something that small. You could go with something like this. ESC http://www.hobbypartz.com/07e04-proton-30a.html Motor http://www.hobbypartz.com/86ma70-2215-800kv.html Battery http://www.hobbypartz.com/98p-25c-1000-3s1p.html Servos http://www.hobbypartz.com/exi-servo-s0820.html Buzz |
All times are GMT -8. The time now is 11:43 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.