Pusher props coming loose
 

My Son's finishing up a Dare Wright Flyer. It's a pusher (of course) and the props are put on backwards. The troube we're finding is the props spin off the shaft at high RPMs. We've thought about putting a little CA on the outside nut as a thread locker. Any ideas?

Thanks,
Mike

Pusher props coming loose
 

Try putting a double nut on the shaft. One nut on top of the other. Be sure you have a drive washer in place. The lock nut should solve your problem.

Pusher props coming loose
 

Ballgunner,
Thanks! Nylon lock nut looks like it's going to do the trick.

Much appreciated!

Mike