GWS Beaver
I just set up some GWS floats and was going to try them out on an old GWS Beaver.
I took the 2015 Himax out a while back and never tried a 400 in it. Running a 1080 prop, which would be a better choice the stock 350 or a 400 from an E-Starter? Thanks Joe |
RE: GWS Beaver
If you want the more powerful setup, and you limit prop size, you should pick the drive that spins the prop the fastest. That could be either motor, depending on the gearing and the battery at this point.
What gear ratios come with the E-Starter on the 400 system? |
RE: GWS Beaver
They are both 66 tooth plastic but I need to count the brass gear. I will be running a 3s lipo.
Joe |
All times are GMT -8. The time now is 11:48 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.