hang-gliders!
 

hello,

I seek the plan of this;

http://img389.imageshack.us/img389/9199/weppyt5ea.jpg

following many research without success I post here! [:o]

I would like to do it for indoor,
I have this like material:

AXI 2204/54
Servo 5gr
Phoenix 10
GWS pico
Lipo 3s 450
Lipo 2s450

Depron 3mm
Depron 6mm

if you can assistance found the plan!

Dancks

RE: hang-gliders!
 

:(

RE: hang-gliders!
 

Check under the zagi forum as this is very much like. anyone who has put a zagi together(or similar) may be of assistance. Also Google it...if you have not already. Somebody will have plans for this(???). Easy to assemble but you need to cut and sink the motor/servos etc and that has to be just right.

Best...