Eflight FLA6421BL Questions
01-06-2023, 12:18 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2023
Location: Lake County CA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Eflight FLA6421BL Questions
Scored this used and want to try to put it in a scratchbuilt foamy, I think it was originally from a Turbo Timber and as far as im aware the board is locked and cannot be reconfigured.
I want to reverse the elevator channel but not sure what that will do to the as3x, does it reverse as well with the channel?
I cant really tell by looking at the movements of the servos, the movements are so slight its hard to tell which way they are offsetting.
I knew this would be a challenge getting this to work in a scratchbuilt and get as3x and SAFE working properly but had to try anyway,
On the package it came in its labeled EFLA6421BL,
On the back of the board its labeled EFLA6950v1,
Any advice appreciated-
Fred
I want to reverse the elevator channel but not sure what that will do to the as3x, does it reverse as well with the channel?
I cant really tell by looking at the movements of the servos, the movements are so slight its hard to tell which way they are offsetting.
I knew this would be a challenge getting this to work in a scratchbuilt and get as3x and SAFE working properly but had to try anyway,
On the package it came in its labeled EFLA6421BL,
On the back of the board its labeled EFLA6950v1,
Any advice appreciated-
Fred
Last edited by Jed Clampett; 01-06-2023 at 12:25 PM.
