Wattage Micro cuts out
#1
Senior Member
Thread Starter
My Feedback: (31)
Join Date: Feb 2002
Location: Edison,
NJ
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts

The other Wattage MiroFlyer thread is geting kinda long so I started a new one here. Anyway, I tried to make the first flights on mine today. It started flying OK but then the motor kept quiting about 15 or 20 feet out. Gave up after 4 tries so I wouldn't damage it. Any ideas anybody?
#2
Senior Member

When my Micro Flyer would cut out, it was due to RF interference in the office park where I work.
When we flew it at the flying field in a rural area, it would fly farther than I could see it.
Matt Kirsch flew his indoors last weekend and it flew well even with other 72MHz. planes in the air.
When we flew it at the flying field in a rural area, it would fly farther than I could see it.
Matt Kirsch flew his indoors last weekend and it flew well even with other 72MHz. planes in the air.