Hacker Q80-14XS F3A in the PHOENIX-E CBmodelisme
#1
Member
Thread Starter
Join Date: Apr 2012
Location: St Hilaire de Chaléons, FRANCE
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
#3
Member
Thread Starter
Join Date: Apr 2012
Location: St Hilaire de Chaléons, FRANCE
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
RE: Hacker Q80-14XS F3A in the PHOENIX-E CBmodelisme
Hello Jason,
The new engine weighs 574g
Benoît Chauvet
CBmodélisme
www.cbmodelisme.com
The new engine weighs 574g
Benoît Chauvet
CBmodélisme
www.cbmodelisme.com
#4
Member
Thread Starter
Join Date: Apr 2012
Location: St Hilaire de Chaléons, FRANCE
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
RE: Hacker Q80-14XS F3A in the PHOENIX-E CBmodelisme
Hello,
The first Phoenix-E with Q80 his ready to fly.
The weight is 4850g with a 5000mAh lipo 10S !
www.cbmodelisme.com
The first Phoenix-E with Q80 his ready to fly.
The weight is 4850g with a 5000mAh lipo 10S !
www.cbmodelisme.com
#8
Member
Thread Starter
Join Date: Apr 2012
Location: St Hilaire de Chaléons, FRANCE
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
RE: Hacker Q80-14XS F3A in the PHOENIX-E CBmodelisme
In the photo are not present the interuptor receiver and receiver batteries (lipo 2S 1000mAh) and controller voltage but they are included in the weight (4850g)
#12
My Feedback: (1)
RE: Hacker Q80-14XS F3A in the PHOENIX-E CBmodelisme
Flyer88, you need to check out the 2M Monolog at F3A Unlimited. It has a "rear'" mounted servo rudder along with all the rest of the line of BJ Craft's 2M pattern planes. You will pay a little more but, you will get sooooo much more! Regards, Everette