BJ Craft Nuance 70
#1
Thread Starter
My Feedback: (3)
BJ Craft Nuance 70
I saw on Mike's F3AUnlimited site that the Nuance 70 size should be arriving within a month.
The picture based instructions (lots of pictures, not a lot of words!) are up on the BJCraft site now as well:
http://rcone.kr/board/index.html?id=bjair1&no=128
Full flying stab, wing strakes, shows both electric (Hacker) and glow motor installs.
The picture based instructions (lots of pictures, not a lot of words!) are up on the BJCraft site now as well:
http://rcone.kr/board/index.html?id=bjair1&no=128
Full flying stab, wing strakes, shows both electric (Hacker) and glow motor installs.
#3
Join Date: Apr 2003
Location: LEICESTERSHIRE, UNITED KINGDOM
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Some details of size here Nuance 70 is elec or IC
http://www.bondaero.co.uk/Nuance_70_..._11246768.aspx
http://www.bondaero.co.uk/Nuance_70_..._11246768.aspx
#4
Member
Join Date: May 2011
Location: SalemOR
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
I'll be more specific, what is the wing dimensions and fuselage length. Kit comes with what? Looks like it weighs the same as 3DHS Osiris which is no longer available. What is the recommended equipment set up?
#5
Thread Starter
My Feedback: (3)
Wingspan 1500mm
Length 1600mm
Wing area 41.6 dm2
Stabilizer area 9.08dm2
Spinner diameter 63 mm
C.G C.G Wing front edge back 120mm
Weight 2400g GP -2800g EP motor All motor
GP motor YS70
EP motor Futaba-FMA-5055KV410. or PMBM-70B Li-Po. 5-6cell
RC system RC system 6ch 4 servo 1 ESC or 6ch 5 servo
towards the bottom of this page
http://www.hobbynet-jp.com/japan/index.html
hope this helps answer your question.
for further detail, I would suggest contacting Mike at F3AUnlimited, as I think he is going to be selling this plane in August
Length 1600mm
Wing area 41.6 dm2
Stabilizer area 9.08dm2
Spinner diameter 63 mm
C.G C.G Wing front edge back 120mm
Weight 2400g GP -2800g EP motor All motor
GP motor YS70
EP motor Futaba-FMA-5055KV410. or PMBM-70B Li-Po. 5-6cell
RC system RC system 6ch 4 servo 1 ESC or 6ch 5 servo
towards the bottom of this page
http://www.hobbynet-jp.com/japan/index.html
hope this helps answer your question.
for further detail, I would suggest contacting Mike at F3AUnlimited, as I think he is going to be selling this plane in August
#6
My Feedback: (41)
Hey everyone the Nuance 70 is open for presale orders. I have a very limited amount available.
Shipping should be on the 28th of the month.
Thanks, Mike Mueller
http://www.f3aunlimited.com/airplane...uance-70-plane
Shipping should be on the 28th of the month.
Thanks, Mike Mueller
http://www.f3aunlimited.com/airplane...uance-70-plane
#7
My Feedback: (41)
Nuance 70 and BiSide 70's all opened for sales. Shipping next week on a very limited inventory.
These planes are really spectacular. A painted out side of the mold composite fuse on both is like nothing else on the market.
They are on another level.
F3AUnlimited
Mike Mueller
800 591 2875
These planes are really spectacular. A painted out side of the mold composite fuse on both is like nothing else on the market.
They are on another level.
F3AUnlimited
Mike Mueller
800 591 2875