RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Electric Pattern Aircraft (https://www.rcuniverse.com/forum/electric-pattern-aircraft-385/)
-   -   Amadeus (https://www.rcuniverse.com/forum/electric-pattern-aircraft-385/11618998-amadeus.html)

drac1 01-25-2018 12:52 AM

Originally Posted by RodneyFord (Post 12400748)
Printing pockets for the servo lead sockets. These glue into the side of the fuselage for the wing and stab servos to plug into.

Similar to the Earnst ones I use. Makes things much easier.

RodneyFord 01-26-2018 07:48 PM

4 Attachment(s)
Got the spats painted and fitted. the axles are holding the spats on. Spats always look good, I have an idea for the graphics on them.

RodneyFord 01-28-2018 10:02 PM

4 Attachment(s)
Cut cooling hole in the nose (still need clean up with diamond file). Installed a baffle to direct the air onto the motor.

RodneyFord 02-07-2018 03:10 PM

8 Attachment(s)
Printed an arming plug and air exhaust ducts. Nearly there.

RodneyFord 02-10-2018 02:25 AM

2 Attachment(s)
Printed some horizontal stabiliser incidence adjusters.

RodneyFord 02-13-2018 01:18 AM

Will be test flying in a few days. Have started a new project for IC. Will be starting a new thread in RC Pattern Flying.

flywilly 02-13-2018 05:26 AM

Good luck with the test flights! Really looking forward to your IC design and fabrication as I still fly IC.

All times are GMT -8. The time now is 09:37 AM.

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.