Thunder Power 1010C/210 setup
 

2 1010C's 2 210 balancers. Powered by a single Iota 55W.power supply.
OK I'm ready for something NEW to come along & outdate me[>:]

RE: Thunder Power 1010C/210 setup
 

That is a cool charging tote!!!! Just so happens I have an extra Futaba double case handy :)

Thanks for the ideas :)

Can you take a pic of underneath the chargers?

RE: Thunder Power 1010C/210 setup
 

I just done something about the same except one 1010 and 210 but also has a Triton and leads for anything you might want to charge. I bought the case at Lowes for $24.95
Great minds think alike. Still working on a buss bar that is safe planning on having everything for power points to banana plug + a couple of sets of Dean ultra plugs.
Steve Maxwell

RE: Thunder Power 1010C/210 setup
 

You would ask after I got everything screwed down!
As soon as I pull it up I will shoot some.
The power supply is screwed to the bottom of the case. Plenty of airvents for the PS. Nothing touching the PS. Plenty of free space around
it.
I will not be able to close the lid & charge but that is a good thing. This will keep chargers cooler. I have a cool down fan I can use during summer heat.
I taped all the charger input wires to the bottom of the nomex plate along with the data cables. The chargers & Balancers are velcroed to the nomex.
I have a fluke meter but decided to leave it @ home. I can loan the HomeDepot meter without regret if needed.